@lyse@lyse.isobeef.org In my case it was a silver necklace, a hummingbird with a wing connected with the cold welding I mentioned using thin brass wires.

It made it in a goldsmithing class (I went to a private craftmanship high-school) so no phones allowed (no photos of it) and no “take home” of the works.

Here’s a rough sketch of it drawn by memory, the dots in the wing is where it connects to the body.

Image

The technique is basically the same as i described, but the scale is much smaller, the whole piece was about 5-6 cm on the largest side.

The rivet was made by drilling a hole through the parts, than with a short and thicker drill you widen the hole on the surface to let the rivet settle flatter on the piece, then with a rubber hammer you hit it to flatten the head until it’s snug on the hole, lock them together by doing the same on the other side.

Note that widening the hole with a thicker drill head won’t make a difference with bigger holes, mine had holes of about 1-2 mm of diameter maximum.

Here’s a sketch of what is going on for clarity.

Image

@lyse@lyse.isobeef.org I actually decided to clean it after my mouse clicks became weirdly unresponsive.

As I began to pull dust out of the gap in the scroll wheel, a mysteryous red fluffy hair ball came out for some reason, so I decided to open it to clean the rest.

After I was done, I went and cleaned the keyboard too.

The mouse was but a teaser of the gore scenes I was about to see… 😱

@lyse@lyse.isobeef.org Great job!

I suggested it because I did it in the past, but never used it on bigger works.

In my case I did it exclusively on really small projects and used a thin rubber head hammer to prevent deforming the metal.

@lyse@lyse.isobeef.org I think you should be able to find some even in general stores in the hardware section.

Hello again everyone! A little update on my twtxt client.

I think it’s finally shaping a bit better now, but… ☝️

As I’m trying to put all the parts together, I decided to build multiple parallel UIs, to ensure I don’t accidentally create a structure that is more rigid than planned.

I already decided on a UI that I would want to use for myself, it would be inspired by moshidon, misskey and some other “social feeds” mock-ups I found on dribbble.

I also plan on building a raw HTML version (for anyone wanting to do a full DIY client).

I would love to get any suggestions of what you would like to see (and possibly use) as a client, by sharing a link, app/website name or even a sketch made by you on paper.

I think I’ll pick a third and maybe a fourth design to build together with the two already mentioned.

For reference, the screens I think of providing are (some might be optional or conditionally/manually hidable):

• Global / personal timeline screen
  
• Profile screen (with timeline)
  
• Thread screen
  
• Notifications screen or popup (both valid)
  
• DM list & chat screens (still planning, might come later)
  
• Settings screen (it’ll probably be a hard coded form, but better mention it)
  
• Publish / edit post screen or popup (still analysing some use cases, as some “engines” might not have direct publishing support)
  

I also plan on adding two optional metadata fields:

• display_name: To show a human readable alternative for a nick, it fallback to nick if not defined
  
• banner: Using the same format as avatar but the image expected is wider, inspired by other socials around
  

I also plan on supporting any metadata provided, including a dynamically parsable regex rule format for those extra fields, this should allow anyone to build new clients that don’t limit themselves to just the social aspect of twtxt, hoping to see unique ways of using twtxt! 🤞

I always wanted to build a terrarium, but after cleaning my keyboard today, I think I already have one…

@lyse@lyse.isobeef.org I can suggest you a trick to do a “cold” welding.

Using a copper wire or a similarly malleable material, pass it through a drilled hole, hammer it on one end until flat, then do the same on the other side.

It does the same job of a rivet but it’s flatter and look nicer on both sides, it’s of course weaker but still strong enough for small objects.

It’s sometimes used to reduce risk of deformities due to heat in hand-crafted jewelry and to reduce costs of small tools.

Hi everyone, here’s a little introduction of my twtxt client (still WIP).

The client I’m developing is a single tenant project that runs entirely in the browser (it might use an optional backend).

It’s entirely based on native web-components and vanilla JS, it is designed to act closer to a toolkit than a full-fledged client, allowing users to “DIY” their own interface with pure html or plain javascript functions.

Users can also build their own engines by including a global javascript object that implement the defined internal API (TBD).

I’m planning to build a system that is easy enough to build and use with any skill level, using only pure html (with a homebrew minimal template engine) or via plain JS (I’ll be also providing some pre-made templates too).

Everything can be self-hosted on any static hosting provider, this allows to spread twtxt within communities like Neocities and similarly hosted websites (basically any Indieweb/Smallweb/Digital garden website and any of the common GitHub/Lab/Berg/lify Pages).

It will be probably named something like TxtCraft or craf.txt but I’m not really sure yet… 🤔 (Maybe some suggestions could help)

I’m still in the experimental phase, so there’s no decent source-code to share yet, but it will soon enough!

@lyse@lyse.isobeef.org Beautiful handwork, how did you seal the corners? I don’t see and hole or anything.

BTW, That Sheet Metal Dude is something else himself, skilled enough to teach others, can work properly with self-imposed contraints, care about safety and is humble enough to be wiling to learn from others, a true craftman worthy of respect.

That’s what I’m using right now, while my own client is still in the making.

A simple bash script to write a post in a mktemp file then clean it with regex.
I don’t even bother to hash the replies, I just open https://twtxt.net and copy the hash by hand since I’m checking the new posts from there anyway (temporarily, as I might end up DoS-ing everyone’s feed in my client right now).

@itsericwoodward@itsericwoodward.com I used the dates as is for indexing them as string, the ISO format allows for free auto sorting.

@bender@twtxt.net What?! In my country you have to pay 100€ every 10 years of which about 75% are just taxes…

@prologic@twtxt.net thanks, I already follow @important_dev_news@n8n.andros.dev too.

BTW, the feed on https://feeds.twtxt.net/ seem down? It says it’s in maintenance.

@zvava@twtxt.net @lyse@lyse.isobeef.org I also think a location based reference might be better.

A thread is a single post of a single feed as a root, but the hash has the drawback of not referencing the source, in a distributed network like twtxt it might leave some people out of the whole conversation.

I suggest a simpler format, something like: (#<TIMESTAMP URL>)

This solves three issues:

• Easier referencing: no need to generate a hash, just copy the timestamp and url, it’s also simpler to implement in a client without the rish of collisions when putting things together
  
• Fetchable source: you can find the source within the reference and construct the thread from there
  
• Allow editing: If a post is modified the hash becomes invalid since it depends on [ timestamp, url, content ]

Hello everyone! 👋

After a long while away, I’m back on twtxt with this new feed.

Some of you might remember me as justamoment@twtxt.net, that was a test account I made for trying things out, but I ended up keeping it more than planned.

I also tried other social platforms in search of a place that felt right for me.

In the end twtxt was the one that ticked all of my boxes:

• Slow social: it act more like a feed reader and I really appreciate that there’s no flood of content that I can’t keep up with.
  
• No server needed: I absolutely love to have total control over my content, I tend to avoid having moving parts that might break, plus you can put your feed under version control and it’s all backed up.
  
• Ownership: I can put my feed anywhere I want and nobody can decide if I can access it or not.
  
• For hackers: a single .txt file allows me to join a community, how cool is that!
  

This is why I decided to build my own twtxt client, one that allows you to decide how the feed is presented on your “instance”.

It’s still in the making but I’ll try to share a bit of it once I defined how things should work.

Coincidentally, I discovered that @itsericwoodward@itsericwoodward.com and @zvava@twtxt.net were also building a twtxt client, seems like twtxt is set to grow!