Banana Pi BPI-R4 Advances 5G Gateway Design with OpenMPTCProuter Support
Banana Pi’s new BPI-R4 is a 5G aggregation gateway built for edge networking. Designed to host multiple cellular modems, it supports OpenMPTCProuter and targets scenarios where wired internet is limited or unavailable. The BPI-R4 is based on the MediaTek Filogic 880 (MT7988A) platform, a quad-core processor running at 2.0 GHz, similar to the original Banana […] ⌘ Read more

RVPC Adds BASIC Interpreter to €1 Open Source RISC-V Computer
The RVPC, a fully open source hardware and software retro-style computer project built around the CH32V003 microcontroller, now supports a BASIC interpreter. This update further expands the capabilities of the €1 RISC-V-based system, which already features VGA output and PS/2 keyboard input, despite its extremely limited resources. Originally conceived as a DIY challenge, the RVPC […] ⌘ Read more

Upcoming Tab5 Terminal Features 5” Display and RISC-V ESP32-P4 for Edge Applications
M5Stack is preparing to launch the Tab5, a 5-inch smart touch terminal powered by the ESP32-P4 RISC-V processor, in early May. Designed as a compact and integrated platform for interactive applications, the device combines a multi-touch display, flexible I/O options, and wireless connectivity within a modular form factor. The Tab5 features a 5-inch IPS display […] ⌘ Read more

MINIX Elite EU715-AI Mini PC Combines Meteor Lake Performance and dual 2.5GbE Ports
The MINIX Elite EU715-AI is a compact mini PC based on Intel’s Meteor Lake-H processor architecture. It features integrated Intel Arc Graphics, Wi-Fi 6E, dual 2.5G Ethernet ports, and quad-screen display support. The system runs Windows 11 Pro and comes equipped with 32 GB of DDR5 SO-DIMM memory, configured as two 16 GB modules. For […] ⌘ Read more

AnalogLamb Expands Maple Series with Low-Cost ESP32C6 Breakout Boards
AnalogLamb has introduced three new RISC-V development boards based on the ESP32-C6, designed for low-cost, full-function, and low-power IoT applications. These boards feature Espressif’s first Wi-Fi 6 SoC, integrating Wi-Fi 6 (2.4 GHz), Bluetooth 5 LE, and IEEE 802.15.4 protocols. Each board is built around the ESP32-C6-WROOM-1 module, which combines a high-performance 32-bit RISC-V core […] ⌘ Read more

MS-A2 Combines Ryzen 9 9955HX and 7945HX Processing with Scalable Storage in a Compact Form Factor
Minisforum recently introduced the MS-A2, a compact workstation featuring high-end AMD processors, support for up to 96GB of memory, and flexible storage options. It offers PCIe expansion, triple 8K display output, and fast wired and wireless connectivity, targeting users who need strong performance in a small footprint. The MS-A2 is a compact comp … ⌘ Read more

Zalmotek RA6M1, RA8M1, and RZ/A3UL Feather SoMs Target High-Performance Embedded Applications
Zalmotek expands its Feather System on Module portfolio with high-performance options designed for advanced embedded systems. These modules are based on Renesas processors and follow the Feather form factor, enabling flexibility for robotics, industrial control, and edge computing applications. The RA6M1 Feather SoM features an Arm Cortex-M4 CPU operating at u … ⌘ Read more

NUCLEO-WBA65RI Brings Bluetooth LE, Thread, and Zephyr RTOS to STM32 Nucleo-64 Platform
The NUCLEO-WBA65RI is a wireless STM32 Nucleo-64 development board built around the STM32WBA65RIV7 microcontroller. It combines the MB2130 MCU RF board with the MB1801 mezzanine board to support Bluetooth LE and IEEE 802.15.4-based protocols such as Thread, Matter, and Zigbee. The STM32WBA65RIV7 microcontroller is a 32-bit Arm Cortex-M33 device featuring 2 MB of flash and … ⌘ Read more

Beetle RP2350 is a $4.90 Mini Development Board for Embedded Projects
The Beetle RP2350 is a coin-sized development board designed for space-constrained embedded projects. Despite its compact 25 × 20.5 mm footprint, it offers a wide range of hardware features and low power consumption, enabling its use in portable devices such as retro computers, game consoles, lighting controllers, and electronic badges. This board is built around […] ⌘ Read more

Zalmotek RA0E1, RA2E1, and RA4M1 Feather SoMs for Energy-Efficient Embedded Development
Zalmotek offers a range of Feather SoMs built around Renesas microcontrollers, targeting energy-efficient and compact embedded applications. These modules follow the Adafruit Feather form factor and include essential interfaces for rapid prototyping and deployment in IoT and low-power scenarios. The RA0E1 Feather SoM is designed for ultra-low-power use cases. It features … ⌘ Read more

MicroPython v1.25.0 Released with ROMFS, RISC-V Assembler, and Expanded Board Support
MicroPython has reached a major milestone with the release of version 1.25.0, delivering significant enhancements after over three years of development. This update introduces the long-anticipated ROMFS (Read-Only Memory File System), new processor support, TLS improvements, and expanded board compatibility across multiple architectures. One of the most notable additions is R … ⌘ Read more

ASUS NUC 15 Pro Cyber Canyon Highlights Compact Design and Intel Ultra CPUs
The ASUS NUC 15 Pro, also known as Cyber Canyon, is a compact mini PC built for professional computing needs. Available in Slim and Tall versions, it features Intel Core Ultra processors and Intel Arc Graphics, offering strong performance and flexible connectivity. Cyber Canyon integrates the latest Intel Core Series 2 Ultra processors with hybrid […] ⌘ Read more

DietPi April 2025 Update (Version 9.12)
The April 18th update of DietPi v9.12 introduces new software options including the fish shell and Amiberry v7/Amiberry-Lite, while also expanding compatibility and resolving various issues. This release focuses on improving usability, editor flexibility, and hardware support across platforms.   DietPi: DietPi is a lightweight, Debian-based operating system optimized for single-board computers and embedded systems. […] ⌘ Read more

Radxa Dual 2.5G Router HAT Expands Networking and Storage for Raspberry Pi 5 and ROCK SBCs
The Radxa Dual 2.5G Router HAT adds high-speed networking and NVMe storage expansion to single-board computers like the Raspberry Pi 5 and Radxa ROCK series, using a single PCIe connection in a compact form factor. The HAT uses the ASM2806 PCIe Gen3 switch chip to convert a single PCIe lane into multiple downstream lanes. This […] ⌘ Read more

Atomic DTU LoRaWAN Base Modules Offer Programmable Wireless Communication for US, EU, and CN Bands
The Atomic DTU LoRaWAN Base is a compact, programmable unit for low-power, long-range IoT communication. Based on the STM32WLE5CC chip, it supports LoRaWAN Class A, B, and C modes and comes in US915, EU868, and CN470 variants to meet regional frequency standards. Each module supports both LoRaWAN and LoRa P2P modes, allowing for deployment either [… … ⌘ Read more

Minichord Synthesizer Offers Open-Source Platform for Chord-Based Music Creation
The Minichord is a compact, chord-focused musical instrument developed by Benjamin Poilve through a co-creation effort with Seeed Studio. Designed for musicians of all skill levels, it combines a tactile chord selection system with a responsive touch interface and MIDI output capabilities. With fully open-source firmware and hardware design, the device encourages community-driven mod … ⌘ Read more

Banana Pi BPI-RV2 Gateway Board Integrates Siflower SF21H8898 RISC-V SoC
Banana Pi has introduced the BPI-RV2, an open-source gateway platform developed in collaboration with Siflower. The board is based on the SF21H8898 SoC, a quad-core RISC-V processor designed for industrial and enterprise networking applications such as routers, access points, and control gateways. The Siflower SF21H8898 is built using TSMC’s 12nm FFC process and integrates a […] ⌘ Read more

Modular Cerebro Clusterboard Supports Raspberry Pi CM4/CM5, Jetson, and Radxa CM5
Cerebro is an upcoming clusterboard platform launching on Kickstarter, designed for AI, edge computing, and embedded development. It supports a range of compute modules including Raspberry Pi CM4 and CM5, NVIDIA Jetson, and Radxa CM5, providing a modular base for scalable systems. The board can host up to four compute nodes and includes an onboard, […] ⌘ Read more

Armbian Introduces Optimized Cloud Images for x86 and aarch64 Deployments
Armbian has expanded its support for cloud infrastructure with a new line of dedicated cloud images designed for generic x86 and aarch64 platforms. These images are tailored for performance, efficiency, and streamlined deployment in virtualized and cloud-native environments. The new Armbian cloud image set aims to meet the growing demand for lightweight and reliable Linux […] ⌘ Read more

(Updated) Metis Compute Board with RK3588 and AI Acceleration for Edge Applications
The Metis Compute Board is a compact single-board computer designed for AI applications requiring high computational performance at the edge. Built around the ARM-based RK3588 processor, it integrates the Metis AIPU for AI acceleration and features up to 16 GB of RAM, dual Gigabit Ethernet ports, and GPIO support. The board incorporates the Rockchip RK3588 […] ⌘ Read more

Renesas RZ/V2N Evaluation Kit for Real-Time Embedded Vision Applications
Renesas Electronics has introduced the RZ/V2N Evaluation Kit, a platform for developing embedded systems with on-device AI. Built around the RZ/V2N microprocessor, it combines an AI accelerator, image signal processor, and security features for vision-based edge applications. The evaluation platform includes two boards: the RTK0EF0186C02000BJ main board and the RTK0EF0168B00000BJ expansion board. Th … ⌘ Read more

(Updated) Sipeed Previews Compact, Low-Cost NanoCluster for Multi-SOM Computing
The NanoCluster is a compact computing platform designed for multi-SOM configurations, offering a balance between size and functionality. It supports up to seven system-on-modules, including the LM3H, CM4, CM5, and M4N, making it adaptable for various applications requiring distributed computing. With dimensions of 85x56mm, the board is significantly smaller than a standard mini-ITX board … ⌘ Read more

Sony Introduces AS-DT1, Described as the World’s Smallest and Lightest Precision LiDAR Sensor
Sony Electronics has introduced the AS-DT1, a miniature LiDAR depth sensor targeting applications with strict space and weight constraints. Measuring 29mm x 29mm x 31mm and weighing 50g, it is described as the world’s smallest and lightest LiDAR sensor in its class. The AS-DT1 is built on Sony’s proprietary Direct Time of Flight LiDAR technology. […] ⌘ Read more

Zephyr RTOS 4.1 Released with Performance Boosts, IAR and Rust Support, and Broader Board Compatibility
Zephyr Project has released version 4.1 of its RTOS, bringing notable improvements in kernel performance, toolchain support, and hardware compatibility. While not an LTS release, it introduces key updates aimed at enhancing developer experience and system efficiency. One of the main focuses of this release is performance. Extensive work wen … ⌘ Read more

Banana Pi Teases BPI-CM6 Module Featuring SpacemiT K1 RISC-V Processor
Banana Pi has shared details of its upcoming BPI-CM6 module, built with the SpacemiT K1 octa-core RISC-V processor. Though not yet launched, it is suggested for AI edge computing, robotics, industrial control, and network storage The BPI-CM6 adopts a 40x55mm form factor and uses board-to-board connectors consistent with the Raspberry Pi Compute Module 4, enabling […] ⌘ Read more

Topaz Tz170 J484 Development Kit with 256 Mbit x32 LPDDR4 at 1.6 Gbps & MIPI D-PHY
The Topaz Tz170 J484 Development Kit is a compact platform for evaluating and prototyping with the Efinix Tz170 FPGA. It integrates onboard memory, configurable I/O, and a preloaded reference design, providing a practical setup for testing and demonstration across a range of FPGA applications. The development kit is built around the Tz170 FPGA, which uses […] ⌘ Read more

HydraNFC Shield v2 and Sniffer Decoder Expand Capabilities for NFC Development & Analysis
The HydraNFC Shield v2 is a high-performance NFC development platform built around the STMicroelectronics ST25R3916 NFC frontend. Designed for NFC research, development, debugging, and security analysis, it is intended to be used with the HydraBus v1.0, a versatile open-source baseboard that acts as the host interface for HydraNFC and other shield extensions. HydraBus … ⌘ Read more

DFRobot Previews RISC-V-Based FireBeetle 2 with ESP32-P4, Targeting Image and Video Applications
The FireBeetle 2 ESP32-P4 is an upcoming compact development board designed for real-time image processing, video streaming, and wireless communication. It targets HMI applications such as digital photo frames, security systems, home control panels, and smart doorbells. The board is built around the ESP32-P4R32 microcontroller, which features a dual-cor … ⌘ Read more

EM1103B Board Integrates 0.5 TOPS NPU and 8MP ISP with RV1103B SoC
The EM1103B is a compact single-board computer built around the Rockchip RV1103B SoC. Designed for vision-based AIoT tasks, it targets applications like smart cameras, doorbells, and battery-powered surveillance devices, combining processing, AI acceleration, and imaging features in a small footprint. As the name suggests, the board is powered by the Rockchip RV1103B, similar to the […] ⌘ Read more

Luckfox Nova Features Cortex-A35 and Onboard Audio Peripherals
LuckFox has introduced a compact Linux development board named Luckfox Nova, built around the Rockchip RK3308B. This quad-core 64-bit Arm Cortex-A35 processor runs at 1.3GHz and is designed for audio processing and smart voice applications. This device shares the same form factor as other LuckFox boards, such as the Pico Ultra RV1106 (ARM Cortex-A7) and […] ⌘ Read more

Axzez Expands OS Compatibility, Lowers Interceptor 2.0 Pricing
Axzez has officially released its updated Interceptor OS Installer, now featuring full support for the Raspberry Pi Compute Module 5. Designed for performance and simplicity, the installer is built on Debian Bookworm and integrates modern kernel versions — 6.12.19-v8 for Raspberry Pi and 6.12.20 for Banana Pi. According to the announcement, this release delivers a […] ⌘ Read more

ESP32-P4-Module-DEV-KIT Introduces Wi-Fi 6, Dual-Core RISC-V, and Ethernet
The ESP32-P4-Module-DEV-KIT is a low-cost development board based on the ESP32-P4, with an integrated ESP32-C6 coprocessor. It supports Wi-Fi 6, Bluetooth 5/BLE, and is designed for embedded HMI applications and edge computing. The board features a 400 MHz RISC-V 32-bit dual-core processor for performance-intensive tasks, along with a low-power RISC-V single-core processor running at up […] ⌘ Read more

NV8600-Nano AI Kit: Jetson Orin Nano Super Mode + 4x GbE, CANBus, MIPI
AAEON’s UP brand has introduced the NV8600-Nano AI Developer Kit, combining an NVIDIA Jetson Orin Nano module with Super Mode support, an expanded I/O carrier board, and a preinstalled AI software package designed for embedded and computer vision developers. The kit features the 8GB Jetson Orin Nano module, delivering up to 67 TOPS of AI […] ⌘ Read more

Efinix Titanium Ti180 FPGA Delivers Embedded LPDDR4x Memory and Expanded I/O
Efinix has introduced the Titanium Ti180J484D1 FPGA, which includes 2 Gb of embedded LPDDR4x memory. By integrating memory directly within the FPGA package, the number of pins required for external memory interfaces is reduced, simplifying PCB design and lowering system complexity. Built on TSMC’s 16 nm process, the Ti180J484D1 FPGA features a high-density, low-power Quantum […] ⌘ Read more

(Updated) OrangePi RV SBC Gains JH7110 RISC-V Processor and PCIe 2.0 Interface
The OrangePi RV is a development board based on the open-source RISC-V architecture, designed to offer high performance with low power consumption. This single-board computer features a JH7110 quad-core RISC-V processor, an M.2 M-key 2280 PCIe slot for SSD expansion, and supports up to 8GB of RAM. The new Orange Pi board is equipped with […] ⌘ Read more

Microchip PolarFire-Powered TinyBeast FPGA Delivers Real-Time Performance with DDR4 and PCIe
CrowdSupply recently introduced the TinyBeast FPGA, a compact platform based on Microchip’s PolarFire FPGA technology. It stands out for its ability to offload computationally intensive tasks from the central processor, enabling real-time data processing in space-constrained environments like automation, measurement, and robotics. TinyBeast FPGA comes in two c … ⌘ Read more

%%title%% Low-Cost Luckfox Pico Pi Boards Offer Linux Development with Ubuntu Support
The Luckfox Pico Pi series consists of four models with a Raspberry Pi SBC form factor, designed for embedded applications. Offering various processing capabilities, connectivity options, and memory configurations, these boards include PoE support and optional 4G connectivity. This SBC accommodates the LuckFox Core1106 module seen earlier this year. The series features the Rock … ⌘ Read more

M5Stack Expands Offline LLM Lineup with Ethernet-Enabled Kit
M5Stack has launched the Module LLM Kit, combining the Module LLM and Module13.2 LLM Mate for offline AI inference and data communication. It supports applications like voice assistants, text-to-speech conversion, smart home control, and more. This module operates using the AiXin AX630C SoC processor, also found in other M5Stack products like the LLM630 Compute Kit […] ⌘ Read more

LILYGO T-Deck Pro Offers E-Paper Display with Configurable 4G and Voice Options
LILYGO has introduced the T-Deck Pro, an open-source development board with a built-in keyboard and a 3.1-inch e-paper touchscreen. Combining sensor integration with touchscreen functionality, it can be applied to various projects in areas like IoT and portable devices. The board features the ESP32-S3FN16R8 dual-core LX7 microprocessor, similar to the T-Deck Plus released in December. … ⌘ Read more

Firefly Automation Controller Adds Industrial Control Capabilities to Raspberry Pi Compute Module
CrowdSupply recently featured the Firefly Automation Controller, a platform combining Raspberry Pi Compute Module-compatible modules with the STM32H7 microcontroller for industrial applications. With IO-Link Class B channels, it supports communication and control of sensors and actuators. The STM32H7 microcontroller, running at up to 480 MHz, manages … ⌘ Read more

Raspberry Pi PoE+ Injector Leverages Power-Over-Ethernet for Remote Deployments
This month, Raspberry Pi launched a device capable of powering its single-board computers over Power-over-Ethernet. The Raspberry Pi PoE+ Injector enables both power and data to be transmitted through a single Ethernet cable, simplifying network infrastructure for projects deployed in remote or difficult-to-access locations. Compatible with devices conforming to IEEE 802.3af and 802.3at … ⌘ Read more

Variscite Expands SoM Lineup with VAR-SOM-AM62P Featuring TI Sitara AM62Px Processor
Variscite has released the VAR-SOM-AM62P, a new System on Module based on the Texas Instruments Sitara AM62Px processor. This module expands the VAR-SOM product line with enhanced multimedia functionality while maintaining a focus on cost efficiency. The module integrates a quad-core Cortex-A53 processor running at 1.4GHz, along with an 800MHz Cortex-R5F real-time co-processo … ⌘ Read more

FET536-C SoM Carrier with High-Speed Interfaces and GPIO Expansion
The FET536-C System on Module, based on the Allwinner T536 processor, is designed for applications that require reliable performance and flexible connectivity. It is intended for use in fields such as data concentrators, DTUs, EV charging systems, transportation, robotics, and industrial control. The module integrates a 1.6GHz quad-core Cortex-A55 CPU and a 64-bit Xuantie E907 […] ⌘ Read more

T-Display K230 Combines RISC-V Processing with LoRa, Wi-Fi, and AMOLED Display
The LILYGO T-Display K230 is a compact development board targeting IoT and embedded system applications. It features the Kendryte K230 system-on-chip, which includes a dual-core 64-bit RISC-V processor and dedicated units for AI acceleration, graphics rendering, and multimedia processing. The K230 SoC includes two CPU cores: CPU1 operates at 1.6 GHz, while CPU0 runs at […] ⌘ Read more

RPI Image Gen Introduces Custom Raspberry Pi Image Creation
The Raspberry Pi team has introduced rpi image gen, a new tool for creating custom software images with detailed control over configuration. It is designed for embedded systems, industrial applications, and personalized projects. rpi image gen is an alternative to the existing pi gen tool, which is used to produce the official Raspberry Pi OS […] ⌘ Read more

M5Stamp PLC Controller with Opto-Isolated Inputs, Relays, PWR CAN, and RS485
The M5Stamp PLC Controller, built on the StampS3A module, is a compact programmable logic controller designed for industrial automation and remote monitoring. With wireless connectivity, versatile I/O, and industrial communication support, it fits applications such as smart manufacturing and distributed control. The StamPLC leverages the StampS3A, which incorporates an ESP32-S3FN8 microcontroll … ⌘ Read more

NXP’s FRDM i.MX 91 Board Provides Low-Power Solution for Linux-Based IoT Systems
Following the release of the FRDM i.MX 93 board, NXP has launched the FRDM i.MX 91 development board, a compact platform based on the i.MX 91 applications processor. It is intended for early-stage development and evaluation of industrial and IoT systems that require basic Linux support, integrated connectivity, and hardware-level security. The board features a […] ⌘ Read more

SOMDEVICES Expands SoM Lineup with µSMARC RZ/V2N for AI and Vision Applications
SOMDEVICES has introduced the µSMARC RZ/V2N, a System-on-Module based on the Renesas RZ/V2N processor. Designed for AI-driven machine learning, vision applications, and industrial automation, this module delivers high computational performance in a compact form factor. This module features the same Renesas processor as the V2N SOM by IMDT, which was covered earlier this month. Bui … ⌘ Read more

New Smartwatches Support PebbleOS with Long Battery Life and E-Paper Displays
Two new smartwatches running open-source PebbleOS have been introduced: Core 2 Duo and Core Time 2. These watches maintain compatibility with thousands of existing Pebble apps while incorporating modern hardware updates. Core 2 Duo is an updated version of the Pebble 2, featuring a 1.26-inch black-and-white e-paper display and a polycarbonate frame in White or […] ⌘ Read more

RDK X5 Development Kit Featuring HDMI, MIPI CSI, and Gigabit Ethernet
The RDK X5 is a development kit designed for intelligent computing and robotics. It features a form factor similar to the Raspberry Pi single board computer but is powered by the 10 TOPS Sunrise 5 processor. The RDK X5 includes an octa-core Cortex-A55 CPU running at 1.5 GHz, a dedicated BPU with 10 TOPS of […] ⌘ Read more