AMI Aptio V Firmware Powers Radxa Orion O6 at COMPUTEX 2025
AMI has announced that its Aptio V UEFI Firmware will power the Radxa Orion O6 demo platform at COMPUTEX Taipei 2025. Described as the “World’s First Open Source Armv9 Motherboard,” the compact Orion O6 Mini ITX board is designed for AI, edge computing, and multimedia-intensive workloads. The board uses the CiX P1 CD8180 SoC, which […] ⌘ Read more
Telum II at Hot Chips 2024: mainframe with a unique caching strategy
Mainframes still play a vital role in today, providing extremely high uptime and low latency for financial transactions. Telum II is IBM’s latest mainframe processor, and is designed unlike any other server CPU. It only has eight cores, but runs them at a very high 5.5 GHz and feeds them with 360 MB of on-chip cache. IBM also includes a DPU for accelerating IO, along with an on-board AI accelerat … ⌘ Read more
Avaota Previews C1 SBC in Raspberry Pi A Form Factor with Allwinner H618
Avaota has recently shared details about the C1, a compact single-board computer in the Raspberry Pi A form factor. Based on the Allwinner H618 processor, the board is a variant of the Yuzuki Chameleon and expands the Avaota SBC lineup with a small-footprint, feature-rich design aimed at embedded development and multimedia applications. Based on the watermark […] ⌘ Read more
5 Linux Commands You’ve Probably Never Heard Of
In this article, I will show you five Linux commands you’ve probably never heard of. They’re simple, practical, and designed to make your…
[Continue reading on InfoSec Write-ups »](https://infosecwriteups.c … ⌘ Read more
Kiwi DVK Pairs SFP and 2.5GbE with PoE and Modular Expansion for Embedded Development
The Kiwi DVK is a compact development kit designed for high performance networking and flexible I O expansion. It supports a range of interfaces and slots for prototyping advanced connectivity and power configurations in embedded systems. The DVK is designed to pair with the Kiwi SoM, a compact system on module introduced earlier this year. […] ⌘ Read more
M0SS-101 Synth with BL616 RISC-V Delivers Classic Controls in a Compact DIY Kit
The M0SS-101 is a compact virtual analog monosynth designed for hands-on subtractive synthesis. It features 42 editable parameters accessible through 26 buttons and a rotary encoder, with RGB LEDs providing visual feedback for signal flow and modulation. The synth includes dual oscillators, a multi-mode filter, envelope and LFO control, delay effects, and 17 preset slots […] ⌘ Read more
T-LoRa Pager Combines ESP32-S3, LoRa, NFC, and GNSS in Handheld IoT Device
The T-LoRa Pager is a compact, programmable IoT development device designed by LILYGO. It integrates LoRa connectivity, NFC capabilities, GNSS positioning, and motion sensing via an embedded IMU, all within a portable form factor. Powered by the ESP32-S3 microcontroller, the device includes 16MB of flash memory and 8MB of PSRAM. The board features an RTC […] ⌘ Read more
Introducing k0rdent v0.3.0: Smarter observability, smoother operations
In my previous blog I wrote a detailed version describing how k0rdent eases platform engineering at scale. For those of you who are unaware, k0rdent is a Kubernetes-native distributed container management environment (DCME) designed to help… ⌘ Read more
AlphaEvolve: A Gemini-powered coding agent for designing advanced algorithms
See also https://www.nature.com/articles/d41586-025-01523-z ( https://archive.is/NBaXE)
Comments URL: https://news.ycombinator.com/item?id=43985489
Points: 501
# Comments: 147 ⌘ Read more
10 Bizarre Consumer Products Pulled Within Days of Release
Some products fail slowly. Others detonate on impact. This list is for the latter—the bizarre, ill-conceived, or prematurely hyped products that barely made it out of the gate before getting yanked from shelves, recalled in embarrassment, or mocked into oblivion. Whether due to dangerous design flaws, baffling branding choices, or just plain public confusion, these […]
The post [10 Bizarre Consumer Products Pulled … ⌘ Read more
A brief history of the numeric keypad
The title is a lie. This isn’t brief at all. Picture the keypad of a telephone and calculator side by side. Can you see the subtle difference between the two without resorting to your smartphone? Don’t worry if you can’t recall the design. Most of us are so used to accepting the common interfaces that we tend to overlook the calculator’s inverted key sequence. A calculator has the 7–8–9 buttons at the top whereas a phone uses the 1–2–3 format. Subtle, but … ⌘ Read more
Coin-Sized RA4M1-Zero Board Features 32-Bit RA4M1 MCU
The RA4M1-Zero is a compact development board based on Renesas’ 32-bit RA4M1 MCU. Running at 48 MHz with a built-in FPU, it features firmware encryption, secure boot, and a castellated design for easy integration into custom hardware. The board uses the R7FA4M1AB3CFM microcontroller from the RA4M1 family. It includes 256 KB of flash memory, 32 […] ⌘ Read more
↳
In-reply-to
»
Also spent the morning continuing to think about a new design for EdgeGuard's WAF. I'm basically going to build an entirely new pluggable WAF that will be designed to only consider Rate Limiting, IP/ASN-based filtering, JavaScript challenge handling, Basic behavioral analysis and Anomaly detection.
⤋ Read More
One thing about my design here is that it would no longer incorporate “regex”-based rules like OWASP, mostly because my experience thus far has taught me that these rules are kind of overly sensitive, produce false positives and I’m not sure they are really very effective. For example, why is the point of performing SQL injection detection at the Edge using a WAF if you already handle SQL properly in the first place? (seriously does anyone still construct SQL queries by hand with effectively printf?!)
Also spent the morning continuing to think about a new design for EdgeGuard’s WAF. I’m basically going to build an entirely new pluggable WAF that will be designed to only consider Rate Limiting, IP/ASN-based filtering, JavaScript challenge handling, Basic behavioral analysis and Anomaly detection.
The only part of this design I’m not 100% sure about is the Javascript-based challenge handling? 🤔 I’m also considering making this into a “proof of work” requirement too, but I also don’t want to falsely block folks that a) turn Javascript™ off or b) Use a browser like links, elinks or lynx for example.
Hmmm 🧐
Milk-V Showcases Jupiter NX, a RISC-V-Based Alternative to Jetson Nano Modules
Milk-V has unveiled the Jupiter NX, a compact system-on-module built around the SpacemIT K1/M1 octa-core processor based on the RISC-V architecture. Designed as a drop-in alternative to the Jetson Nano, it offers broad compatibility with existing Nano baseboards, along with high performance and versatile connectivity options. The SoC at the core of the Jupiter NX […] ⌘ Read more
SiFive and Kinara Partner to Launch USB-Based X280 RISC-V Vector Development Board
SiFive and Kinara have announced a new partnership to offer developers direct access to the SiFive Intelligence X280 RISC-V vector processor through a compact USB-based enablement board. The HiFive Xara X280 board, based on Kinara’s Ara-2 processor, is designed to allow early-stage evaluation and development of RISC-V vector software, particularly for AI and machine learning […\ … ⌘ Read more
Design system annotations, part 2: Advanced methods of annotating components
How to build custom annotations for your design system components or use Figma’s Code Connect to help capture important accessibility details before development.
The post [Design system annotations, part 2: Advanced methods of annotating components](https://github.blog/engineering/user-experience/design-system-annotations-part-2-advanced-methods-of-annotating-component … ⌘ Read more
Design system annotations, part 1: How accessibility gets left out of components
The Accessibility Design team created a set of annotations to bridge the gaps that design systems alone can’t fix and proactively addresses accessibility issues within Primer components.
The post [Design system annotations, part 1: How accessibility gets left out of components](https://github.blog/engineering/user-experience/design-system-annotations-part-1-how … ⌘ Read more
(Updated) Upcoming Tab5 Terminal Features 5” Display and RISC-V ESP32-P4 for Edge Applications
M5Stack is preparing to launch the Tab5, a 5-inch smart touch terminal powered by the ESP32-P4 RISC-V processor, in early May. Designed as a compact and integrated platform for interactive applications, the device combines a multi-touch display, flexible I/O options, and wireless connectivity within a modular form factor. The Tab5 features a 5-inch IPS display … ⌘ Read more
ASUS Unveils Q870 ATX Motherboard with LGA1851 and Intel Core Ultra Series 2 Support
ASUS has recently unveiled a new ATX motherboard based on the Intel Q870 chipset, designed to support Intel Core Ultra Processors (Series 2) using the LGA1851 socket. While not yet officially launched, this upcoming board targets industrial computing and embedded applications with a combination of modern performance and legacy interface support. The motherboard supports proce … ⌘ Read more
VP2430 Vault Pro Featuring Intel N150 and 4x 2.5GbE in a Fanless Design
The VP2430 is a compact, fanless network appliance based on Intel’s N-series platform. As part of the Vault Pro series, it builds on earlier models such as the VP2410 and VP2420, introducing incremental enhancements in processing capability, thermal management, and connectivity. This model incorporates the Intel N150 quad-core processor, operating at up to 3.6GHz with […] ⌘ Read more
Arduino Uno Gets Upgraded with Integrated Ethernet and USB Type-C
The UnoNet is a microcontroller board based on the ATmega328PB, designed with the same form factor and pin layout as the Arduino Uno Rev 3. It integrates Ethernet via a W5500 controller and includes a USB Type-C port, RJ45 connector, DC barrel jack, ICSP header, and reset button. The ATmega328PB is clocked at 16 MHz […] ⌘ Read more
(Updated)Modular Cerebro Clusterboard Supports Raspberry Pi CM4/CM5, Jetson, and Radxa CM5
Cerebro is an upcoming clusterboard platform launching on Kickstarter, designed for AI, edge computing, and embedded development. It supports a range of compute modules including Raspberry Pi CM4 and CM5, NVIDIA Jetson, and Radxa CM5, providing a modular base for scalable systems. The board can host up to four compute nodes and includes an onboard, […] ⌘ Read more
(Updated) ESP32-C5-DevKitC-1 with 240MHz RISC-V Processor, Zigbee, and Thread Connectivity
The ESP32-C5-DevKitC-1 is another upcoming entry-level development board designed for IoT applications, featuring the ESP32-C5-WROOM-1 module. This board supports key wireless protocols, including Wi-Fi 6 (2.4 GHz and 5 GHz), Bluetooth LE 5, Zigbee, and Thread. The ESP32-C5-WROOM-1 module is equipped with a 32-bit RISC-V single-core processor running at 240 MHz along … ⌘ Read more
LILYGO T-Echo Lite Offers Integrated LoRa, GNSS, and E-Paper Display in Compact Form
The LILYGO T-Echo Lite is a compact wireless development board designed for embedded applications that require long-range communication, positioning, and low-power display capabilities. Built around the Nordic nRF52840 microcontroller, the platform supports a wide range of wireless protocols and is available in several hardware configurations. The main processing component is t … ⌘ Read more
Luckfox Core1106 Smart 86 Box with Touchscreen, RS485 Interface, and Optional Wireless Connectivity
The Luckfox Core1106 Smart 86 Box is a development board designed for integration into standard 86-type wall enclosures. Based on the Luckfox-Pico-86-Panel series, it features Rockchip’s RV1106G2 or RV1106G3 processor and is intended for use in smart home interfaces and industrial control systems. This device uses a single-core ARM Cortex-A7 proces … ⌘ Read more
Banana Pi BPI-R4 Advances 5G Gateway Design with OpenMPTCProuter Support
Banana Pi’s new BPI-R4 is a 5G aggregation gateway built for edge networking. Designed to host multiple cellular modems, it supports OpenMPTCProuter and targets scenarios where wired internet is limited or unavailable. The BPI-R4 is based on the MediaTek Filogic 880 (MT7988A) platform, a quad-core processor running at 2.0 GHz, similar to the original Banana […] ⌘ Read more
Zhaoxin’s KX-7000 x86-64 processor
Chips and Cheese takes a very detailed look at the latest processor design from Zhaoxin, the Chinese company that inherited VIA’s x86 license and has been making new x86 chips ever since. Their latest design, 世纪大道 (Century Avenue), tries to take yet another step closer to current designs chips form Intel and AMD, and while falling way short, that’s not really the point here. Ultimately performance is what matters to an end-user. In that respect, the KX-7000 somet … ⌘ Read more
Google is working on a big UI overhaul for Android
When Google released the fourth beta of Android 16 this month, many users were disappointed by the lack of major UI changes. As Beta 4 is the final beta, it’s likely the stable Android 16 release won’t look much different than last year’s release. However, that might not hold true for subsequent updates. Google recently confirmed it will unveil a new version of its Material Design theme at its upcoming developer conference, and we … ⌘ Read more
Upcoming Tab5 Terminal Features 5” Display and RISC-V ESP32-P4 for Edge Applications
M5Stack is preparing to launch the Tab5, a 5-inch smart touch terminal powered by the ESP32-P4 RISC-V processor, in early May. Designed as a compact and integrated platform for interactive applications, the device combines a multi-touch display, flexible I/O options, and wireless connectivity within a modular form factor. The Tab5 features a 5-inch IPS display […] ⌘ Read more
W3C Standardizes Mozilla Developed Spying Technology
“Privacy Preserving Attribution”, first deployed in Firefox, is designed to make it easy for a browser vendor to collect large amounts data from users. ⌘ Read more
AnalogLamb Expands Maple Series with Low-Cost ESP32C6 Breakout Boards
AnalogLamb has introduced three new RISC-V development boards based on the ESP32-C6, designed for low-cost, full-function, and low-power IoT applications. These boards feature Espressif’s first Wi-Fi 6 SoC, integrating Wi-Fi 6 (2.4 GHz), Bluetooth 5 LE, and IEEE 802.15.4 protocols. Each board is built around the ESP32-C6-WROOM-1 module, which combines a high-performance 32-bit RISC-V core […] ⌘ Read more
10 Fictional Species Designed for Battle
War is generally not something to aspire to. It’s a desperate measure to resolve one’s differences when all other options fail. Fighting forgoes people’s evolutionary intelligence and reduces them to their baser instincts. Such barbarism leaves both sides licking their wounds, coping with the pain and death that their actions have wrought. Granted, combat is […]
The post [10 Fictional Species Designed for Battle](https://listverse.com/2025/04/26/10-f … ⌘ Read more
The VTech Socratic method
We’ve had a lot of fun with VTech’s computers in the past on this blog. Usually, they’re relatively spartan computers with limited functionality, but they did make something very interesting in the late 80s. The Socrates is their hybrid video game console/computer design from 1988, and today we’ll start tearing into it. ↫ Leaded Solder web log Now we’re in for the good stuff. A weird educational computer/game console/toy thing from the late ’80s, by VTech. I have a massive soft s … ⌘ Read more
Zalmotek RA6M1, RA8M1, and RZ/A3UL Feather SoMs Target High-Performance Embedded Applications
Zalmotek expands its Feather System on Module portfolio with high-performance options designed for advanced embedded systems. These modules are based on Renesas processors and follow the Feather form factor, enabling flexibility for robotics, industrial control, and edge computing applications. The RA6M1 Feather SoM features an Arm Cortex-M4 CPU operating at u … ⌘ Read more
Beetle RP2350 is a $4.90 Mini Development Board for Embedded Projects
The Beetle RP2350 is a coin-sized development board designed for space-constrained embedded projects. Despite its compact 25 × 20.5 mm footprint, it offers a wide range of hardware features and low power consumption, enabling its use in portable devices such as retro computers, game consoles, lighting controllers, and electronic badges. This board is built around […] ⌘ Read more
Zalmotek RA0E1, RA2E1, and RA4M1 Feather SoMs for Energy-Efficient Embedded Development
Zalmotek offers a range of Feather SoMs built around Renesas microcontrollers, targeting energy-efficient and compact embedded applications. These modules follow the Adafruit Feather form factor and include essential interfaces for rapid prototyping and deployment in IoT and low-power scenarios. The RA0E1 Feather SoM is designed for ultra-low-power use cases. It features … ⌘ Read more
Email Verification Bypass during Account Creation | Insecure Design ⌘ Read more
Bunnings strikes deal addressing concerns of ‘terrified’ plant growers
Bunnings plant suppliers will now have written agreements under a new statement of principles designed to protect growers, following complaints about the hardware giant during last year’s supermarket inquiry. ⌘ Read more
ASUS NUC 15 Pro Cyber Canyon Highlights Compact Design and Intel Ultra CPUs
The ASUS NUC 15 Pro, also known as Cyber Canyon, is a compact mini PC built for professional computing needs. Available in Slim and Tall versions, it features Intel Core Ultra processors and Intel Arc Graphics, offering strong performance and flexible connectivity. Cyber Canyon integrates the latest Intel Core Series 2 Ultra processors with hybrid […] ⌘ Read more
Minichord Synthesizer Offers Open-Source Platform for Chord-Based Music Creation
The Minichord is a compact, chord-focused musical instrument developed by Benjamin Poilve through a co-creation effort with Seeed Studio. Designed for musicians of all skill levels, it combines a tactile chord selection system with a responsive touch interface and MIDI output capabilities. With fully open-source firmware and hardware design, the device encourages community-driven mod … ⌘ Read more