@alexonit@twtxt.alessandrocutolo.it Hell yeah, that looks great! :-) What a pity you’re not having any photos, though. I love that you went to a craftsmanship school and learned some amazing skills. The older I get, the more I admire all sorts of crafts. That’s also why I started building physical stuff myself in my spare time.

This sketch is well done, so you countersunk the holes to make room for the heads. Makes absolutely sense. Mille grazie! <3

@movq@www.uninformativ.de Yeah, it’s lovely out there right now.

@movq@www.uninformativ.de That’s satisfying. :-) Not all my clocks are radio-controlled, though.

I’ve got a digital alarm clock from the Netherlands (no idea where I got this) and it always runs an hour late. No clue. I put it on a shelf in the workshop where it causes the least amount of confusion.

@prologic@twtxt.net Oh, I will certainly check this out! Thanks for the tip, mate! <3

I went on a short stroll in the woods and came across two great spotted woodpeckers. They were busy with their courtship display, I reckon, so it took them a while to notice me and escape into thicker parts out of sight. That was really awesome. There are a lot of apples and sloes now, looking really good. The cam issues still persist, though, I wish the photos were sharper. Also, I got the error that the function wheel was not adjusted correctly and alledgedly pointed between two options numerous times. And no, it was bang on a setting. https://lyse.isobeef.org/waldspaziergang-2025-10-07/

In today’s blurry photos series: https://lyse.isobeef.org/rabe-2025-10-06/

@prologic@twtxt.net Oh, that’s cool! :-) Feeding magpies seems to be an Aussie thing, the Cutting Edge Engineering Australia videos usually also include a cute magpie feeding clip.

@bender@twtxt.net Off you go to the magpie hunt! We wanna see Florida pies!

Today, I experimented with Linux Capabilities as a continuation to my Unix Domain Sockets research from a few months ago: https://lyse.isobeef.org/caller-information-via-unix-domain-sockets/#capabilities

I learned that I don’t know hardly anything and there is heaps more to explore. Tomorrow, I will do the same in Go and see how that feels.

I got the magpie again this morning: https://lyse.isobeef.org/elster-2025-10-05/ 02 is at takeoff.

Oh great, I got two order confirmation e-mails. No, I didn’t click twice, same order number, two different Message-IDs.

@alexonit@twtxt.alessandrocutolo.it Thanks mate! Ah cool, now I’m curious, what did you make? :-)

You used the rubber hammer to fold the metal, not to set the rivets, right? :-? I glued cork on my wooden mallet some time ago. This worked quite good for bending. But rubber might be even better as it is a tad softer. I will try this next time, I think I have one deep down in a drawer somewhere.

@zvava@twtxt.net No HEAD requests, but regular GETs with If-Modified-Since request headers if possible: https://git.mills.io/yarnsocial/yarn/src/branch/main/internal/fetcher.go#L270

Flamy skies are always great to look at: https://lyse.isobeef.org/abendhimmel-2025-10-04/

I experimented with a 2.4x7mm aluminium rivet I had on hand. As expected, it was quite a bit long. Using my pliers wrench, I was able to crush it down by quite some bit. I should have taken a photo right after the hand riveter for comparison. Now, it’s much smoother and the chance of cutting my hand open is reduced by quite a bit. But breaking the burr with a few file strokes is still necessary. I should get 2.4x4mm rivets and try with them. I reckon they would be more suited for my 0.5mm sheet metal.

With the pliers wrench again, I was able to also crush down the chopped off 3mm copper nail and form a second head. That was surprisingly easy. Now, I need to figure out how to efficiently make a head on the remaining copper nail shaft, so that I can use this again.

Both are rock solid, there’s absolutely no movement at all between the two sheet metal cutoffs.

https://lyse.isobeef.org/tmp/nietenexperiment/

@movq@www.uninformativ.de Too bad. :-/

@movq@www.uninformativ.de Yep, there’s python3-tk and a bunch more packages with extensions.

@movq@www.uninformativ.de Nice! Are there still chicken on this field?

@movq@www.uninformativ.de I never programmed with Tkinter myself and it’s been ages that I ran a program which used it. I always thought that it looks awful. But maybe there are nicer themes these days. I just wanted to give the demo python3 -m tkinter a try, but this module doesn’t exist. I was always under the wrong impression that Tkinter is bundled with Python.

@movq@www.uninformativ.de I was never a fan of GTK, because coming from KDE, it didn’t offer remotely as much of customizability. What are you switching to, Xfce?

@zvava@twtxt.net yarnd fetches the feeds roughly every ten minutes:

grep twtxt.net www/logs/twtxt.log | cut -d ' ' -f1 | tail -n 20
2025-10-04T07:00:45+02:00
2025-10-04T07:10:26+02:00
2025-10-04T07:22:43+02:00
2025-10-04T07:30:45+02:00
2025-10-04T07:40:48+02:00
2025-10-04T07:52:59+02:00
2025-10-04T08:00:07+02:00
2025-10-04T08:13:33+02:00
2025-10-04T08:23:13+02:00
2025-10-04T08:31:22+02:00
2025-10-04T08:41:29+02:00
2025-10-04T08:53:25+02:00
2025-10-04T09:03:31+02:00
2025-10-04T09:11:42+02:00
2025-10-04T09:23:11+02:00
2025-10-04T09:29:49+02:00
2025-10-04T09:36:17+02:00
2025-10-04T09:46:33+02:00
2025-10-04T09:58:40+02:00
2025-10-04T10:06:54+02:00

I suspect that the timing was just right. Or wrong, depending on how you’re looking at it. ;-)

Uuuhhh, that’s rather interesting, I didn’t know about that:

Aachen has been officially certified as “Bad Aachen”, but for alphabetical reasons usually declines to use the prefix

— https://en.wikipedia.org/wiki/List_of_spa_towns_in_Germany#A

That made me chuckle.

Sieht ganz so aus, als hätte die gute @kat@yarn.girlonthemoon.xyz ihre Büchse mit in den Kurort Bad Gateway genommen.

Sorry, this pun only works in German, where “Bad” means spa and is used as prefix for spa towns.

@movq@www.uninformativ.de You should send ‘em this sample. ;-)

@movq@www.uninformativ.de It completely escapes me, too. I will never understand it, but people are just wired very differently.

Relevant film: https://www.youtube.com/watch?v=YYNbSuMLZZg

@movq@www.uninformativ.de Yeah, the lighting needs to be right in order to make them really pop like this. I got lucky today. :-)

My photos are categorized as crafts porn for my workmates: https://lyse.isobeef.org/tmp/porn.png

The main feed got quite large again, so it’s time for another rotation into archive feeds. I just noticed that I forgot to upload the archive feeds last time. Whoops. :-)

Autumn and magpie around the corner: https://lyse.isobeef.org/elster-2025-10-02/

Okay, they are also offering 2.8x25mm copper nails. Which I actually do have a single one here. :-)

My hardware collection also includes a few brass-like looking screws that I could repurpose into rivets. But I reckon I have to upgrade my burner first. I’m not a metal worker by any means, so I could be totally wrong, but I imagine that some heat is necessary to loosen the work-hardening effect when beating on them. I will do some experiments on Saturday and report back.

@movq@www.uninformativ.de Not sure, if this observation is correct. I know so many techies who also use every latest shit and automate their homes which is scary as hell to me.

@alexonit@twtxt.alessandrocutolo.it I just checked my local hardware store next town and 4mm brass rod is the closest I find.

@movq@www.uninformativ.de No doubt, some things are just so much better the low-tech way. Waste paper, like an opened envelope, suits a shopping list perfectly fine. You’ve got a nice handwriting, I like it.

@movq@www.uninformativ.de \o/

@thecanine@twtxt.net Oh no, the poor crocodile is struck by lightning!

There was a monster in the sky: https://lyse.isobeef.org/abendhimmel-2025-10-01/

@movq@www.uninformativ.de I wish I could truly say that. :-D

Thanks, @alexonit@twtxt.alessandrocutolo.it! Yeah, this classic rivet is a good, yet laborous alternative. I don’t mind the work, I just don’t have any copper at hand. I might give this some more thought, though.

@alexonit@twtxt.alessandrocutolo.it Hahaha, that made me laugh real good. :-D I find it always surprising what collects in a short amount of time.

@zvava@twtxt.net Mixing both addressing schemes combines the worst of both worlds in my opinion. Please don’t do that.

@zvava@twtxt.net Yes, the specification defines the first url to be used for hashing. No matter if it points to a different feed or whatever. Just unsubscribe from malicious feeds and you’re done.

Since the first url is used for hashing, it must never change. Otherwise, it will break threading, as you already noticed. If your feed moves and you wanna keep the old messages in the same new feed, you still have to point to the old url location and keep that forever. But you can add more urls. As I said several times in the past, in hindsight, using the first url was a big mistake. It would have been much better, if the last encountered url were used for hashing onwards. This way, feed moves would be relatively straightforward. However, that ship has sailed. Luckily, feeds typically don’t relocate.

Haha, turns out, it’s the perfect size to fit hankies: https://lyse.isobeef.org/tmp/blechschachtel/07.jpg

Thank you, @alexonit@twtxt.alessandrocutolo.it! It’s not sealed at all. If you were pouring in a liquid, it would run out on all four corners. It’s just folded over and carefully hammered shut as best as possible. 03 is a bit blurred, but you can see the tab from the right (the short side) tucking in on the left (the long side). The hem on top clamps it in place fairly decently.

I decided against blind rivets, because they leave ugly looking and sharp backsides, which can also interfer with the contents of the box. However, they would be an easy solution to make the corners more rigid and prevent any movement from the short sides.

Unfortunately, I can’t weld or solder, so that’s not an option. It would be the by far best solution. I wanna learn it one day, though.

Yes, Ken is a really great dude. He’s the reason I gave this a shot in the first place. :-)

@itsericwoodward@itsericwoodward.com No worries, all good, mate! We all have to start somewhere. Other software requests my feed several orders of magnitude more often.

I can confirm, the User-Agent header appears to be fixed. \o/

Two other things I noticed, though:

1. There’s now an OPTIONS request for my feed coming from something that claims to be Firefox, pointing to your feed URL in the query. No clue what this is about. In any case, it’s rejected with a 405 Method Not Allowed.

2. Not that these few requests bother me at all, but you might wanna implement caching next with either the If-Modified-Since or If-None-Match request headers. This way, if the feed hasn’t changed, the web server can reply with a 304 Not Modified and no body at all, saving unnecessary traffic. But again, this is really not an issue for me at all. I just wanted to make sure you’re aware of it, that’s all. It might be even already on your agenda. Or you might decide to never do anything about it, which is also fine for me. :-)

@prologic@twtxt.net Ta! :-)

@movq@www.uninformativ.de It’s an ancient 1.22.4. :-)

@movq@www.uninformativ.de I got an empty line through the table, similarly to one of the linked bug reports, just at a different location:

https://lyse.isobeef.org/tmp/screenshot-2025-09-27-13-56-13.png

@bender@twtxt.net @movq@www.uninformativ.de Thank you! Not sure what I end up putting in there, but I’m sure I will find some tools to go in. :-)

Yes, this was a flat piece of sheet metal. It went together like a cardboard box, just much slower and with timbers clamped down to get a straight folding line. I don’t have a sheet metal brake, so I just carefully hammered the piece bit by bit. Like in this video by the Sheet Metal Dude: https://www.youtube.com/watch?v=WYgEfWEMXk0

For a very first attempt, I’m extremely happy how this tray turned out: https://lyse.isobeef.org/tmp/blechschachtel/ The photos look rougher than in person. The 0.5mm aluminium sheet was 300x200mm to begin with. Now, the accidental outside dimensions are 210x110mm. It took me about an hour to make. Tomorrow, I gotta build a simple folder, so I don’t have to hammer it anymore, but can simply bend it a little at a time.

@movq@www.uninformativ.de You didn’t miss anything. Just time for more useful stuff. ;-)

@alexonit@twtxt.alessandrocutolo.it You might wanna have a look at this: https://lyse.isobeef.org/tmp/twthash.py