LILYGO’s ESP32-based module comes with 2.41” AMOLED display
The LILYGO T4 S3 is a small IoT module that supports 2.4 GHz Wi-Fi & Bluetooth 5 (LE) and it’s equipped with a 2.41” AMOLED display with capacitive touchscreen capabilities. This open-source board was designed for developers and hobbyists since it also supports Arduino and MicroPython. This is another recent module from LILYGO based on […] ⌘ Read more

ESP32 board equipped with Ethernet and MicroSD card slot
One of the latest embedded products launched by LILYGO is the T-ETH-Lite which is based on the ESP32-S3 module with Wi-Fi and Bluetooth connectivity. Additionally, the compact board includes an ethernet port and a microSD card slot for convenient storage. This development board, like other new LILYGO products, is built around the ESP32-S3 microcontroller.  ESP32-S3 […] ⌘ Read more

BeagleV-Ahead pocket computer powered by RISC-V SoC
BeagleBoard.org launched today the open-source BeagleV-Ahead. This new open-source RISC-V Single Board Computer is powered by the Alibaba T-head System-on-Chip which combines a quad-core RISC-V CPU, 4 TOPS NPU and 50 GFLOPS Imagination BXM-4 GPU. As previously mentioned, the BeagleV-Ahead accommodates the Alibaba-T-Head TH1520 SoC with the following features: TH1520 — quad-core 64-bit RISC-V 64GCV […] ⌘ Read more

Turing Pi reveals RK1 CM specifications
The Turing RK1 is a computer module powered by the Octa-core Rockchip RK3588 System-on-Chip. The RK1 will be available with up to 32GB RAM, 16GB eMMC storage and various other interfaces. The Turing RK1 is compatible with the Turing Pi 2 mini-ITX cluster board released last year.  RK3588S SoC — Quad-core Cortex-A76 (up to 2.4GHz), […] ⌘ Read more

AtomS3 Lite ESP32S3 Dev Kit introduced at $7.50
M5Stack just launched a miniature embedded device based on the ESP32-S4FN3 Microcontroller. The AtomS3 Lite ESP32S3 Dev Kit can be used in smart IoT applications and it’s equipped with up to 6x GPIOs, RGB indicators and one Grove connector for external peripherals. M5Stack indicates that the AtomS3 Lite features the following ESP32 module: ESP32-S3N8 – […] ⌘ Read more

ESP32 dev kit includes touchscreen and optional thermal imaging
GroupGets recently featured the gCore development kit designed for portable GUI-based applications. The dev kit is also compatible with an expansion board and a Teledyne FLIR Lepton FS to obtain thermal imaging capabilities. The MCU found on the gCore is the ESP32 WRover-B from Expressif Systems. This ESP32 module features two cores with an adjustable […] ⌘ Read more

RP4B based dual-arm robot offers 13 DoF
The myBuddy by Elephant Robotics, is a dual-arm platform built around a Raspberry Pi 4B. This platform is enabled with thirteen Degrees of Freedom (DoF) and a maximum payload of 250g for each arm. The platform also supports VR control and integrates a 7” touchscreen display. Following the introduction of the mechArmPi 270, the myBuddy […] ⌘ Read more

myPalletizer 4 axis robot arm available in M5 Stack & Raspberry Pi 4 models
Elephant Robotics has developed a 4 degrees of freedom (DOF) robotic arm platform that comes in an RPI 4 model B version and an M5 version. The robotic arm comes in a compact design and supports several programming languages to meet hobbyists and STEM educators requirements.  In the past, LinuxGizmos reviewed the MyCobot robotic arm […] ⌘ Read more

Tiger Lake-U Type 10 module targets mobile applications
Aaeon’s “NanoCOM-TGU” Type 10 module features Tiger Lake-U “E” and “GRE” with up to 16GB LPDDR4x with optional ECC, an up to 256GB NVMe drive, a 2.5GbE controller, and I/O including 4x PCIe, 2x SATA, DDI, eDP, and 10x USB including 2x Gen2. In November, Aaeon announced a 95 x 95mm COM-TGUC6 COM Express Compact […] ⌘ Read more

Orange Pi 3 slims down in new LTS version
A $35 “Orange Pi 3 LTS” SBC has arrived that runs Linux or Android 9 on a quad -A53 Allwinner H6 and supplies 2GB LPDDR3, 8GB eMMC, WiFi/BT, GbE, HDMI 2.0a, USB 3.0, 2x USB 2.0, and 26-pin GPIO. In an era of chip and component shortages, the trend of new community backed SBCs adding […] ⌘ Read more

UPS HAT For Raspberry Pi offers real-time monitoring
SB Components has won KS funding for a $31 and up “UPS HAT For Raspberry Pi” with slots for dual 18650 Li-Ion batteries plus dual 5V micro-USB inputs, 8.4V 2A charging, a 0.91 OLED display, and real-time monitoring. SB Components, which has launched Raspberry Pi add-ons such as the PiRelay 8, has gone to Kickstarter […] ⌘ Read more

10GbE shows up on Linux router board and M.2 module
Wallys announced a “DR8072 V01” router board that runs Linux on a 2.2GHz, quad -A53 Qualcomm IPQ8072A and offers 802.11ax, mini-PCIe, 4x GbE, and 10GbE SFP and copper ports. Meanwhile, Innodisk unveiled the world’s first 10GbE M.2 module. Over the last year we have seen 2.5GbE and to a lesser extent 10GbE ports extend their […] ⌘ Read more

Edge AI system combines octa-core Arm SoC with Hailo-8 NPU
Axiomtek’s rugged “RSC100” edge AI system runs Linux on an octa-core Arm processor accompanied by a Hailo-8 NPU. Highlights include 4GB LPDDR4, 16GB eMMC, 2x GbE, 2x CAN, 2x mini-PCIe, and 2x M.2. Axiomtek announced the latest embedded computing vendor to bundle Hailo’s up to 26-TOPS, 3-TOPS per Watt Hailo-8 NPU. The compact, fanless RSC100 […] ⌘ Read more